MANUFACTURED HUD CODE
Frame remains on home and used to set on foundation
2″x6″ or 2″x8″ Floor Joists 16″ OC on top of Steel Frame
Single 2″x6″ (or 8″) Rim Rail on exterior sidewall, endwalls and marriage walls
Exterior walls have Single 2″x6″ Top Plates and 1″x6″ Bottom Plates
Interior walls with 2″x4″ studs 24″ OC with 2″x4″ Top Plate and 1″x4″ Bottom Plate (GS series 2″x3″ Interior walls)
Optional Interior walls with 2″x4″ studs 16″ OC with 2″x4″ Top Plate and 1″x4″ Bottom Plate
30# Roof Load (HUD Rafter) Options up to 120#
Shingle Underlayment with 15# Paper
Roof Pitches 3:12 & 4:12 on 28 Wide’s, 3.31:12 on 30 Wide’s, 2.66:12 on 40 Wide’s, with eaves of 8″, 12″ and 16″
Insulation R-40 Roof, R-21 Wall, R-33 Floor
5/8” OSB w/ seams sanded Floor Decking
Typical Window & Door Headers are single 2″x6″ Lay Flat Headers (depend on size of window and roof load)
7/16″ OSB Underlayment w/House Wrap installed under Lap, vinyl, log siding only–Not installed under Smart Panel
7/16″ Facia Board
30 Gallon Electric Water Heater ( optional 40 or 50 gallon)
M/H Electric Furnace with return air vents in walls above bedroom doors
Plumbing with auto vents and some vents through roof
No Water Softener Plumbing Loop required Color Coded Pex Plumbing Line
Drain water system complete
No Pressure & Temperature Balanced faucets required on tub/showers
6″ or 8″ Heat Duct Boots
1-1/2″ Drain and P-traps
1″ x6″ Sub Facia
Whole House Water Shutoff Valve included in laundry plumbing hook up box
Signature and Platinum series with FHA grade carpet
All Others with non-FHA grade carpet Smoke detectors in all bedrooms and in living areas
MODULAR IRC CODE
Frame is Removed, Req. Full Footing/ Stem Wall Foundation or Basement
2″x10″ Floor
Double 2″x12″ Rim Joist Rails Around Each Floor Section
Crawlspace access or optional basement access
Exterior walls have Double 2″x6″ Top Plate and 2″x6″ Bottom plate
Interior walls with 2″x4″ studs 24″ OC with 2″x4″ Top & Bottom Plates
Optional Interior walls with 2″x4″ studs 16″ OC with 2″x4″ Top and Bottom Plates
30# Roof Load (IRC Modular Rafter) Optional up to 120#
Shingle Underlayment with Aquabar Underlayment
Roof Pitches on all houses 4:12 and 6:12 Optional Insulation R-49 Roof, R-19 Wall and R-33 Floor Insulation
19/32″ T & G Plywood Floor Decking w/ seams sanded
Double Vertical 2″x4″ or 2”x6” Window & Door Headers (depend on size of window opening and roof load)
7/16″ OSB Underlayment w/House Wrap installed under ALL exterior sidings
5/4 Fascia Board or Optional Exterior Painted Solid Wood Trim
50 Gallon Residential Electric Water Heater
Residential Electric Furnace
All plumbing vents through roof
All plumbing ran in home with optional truss floor system
Drain system plumbed through floor and finished on site (standard floor joist)
Pressure & Temperature Balanced faucets on tub/showers
10″ Heat Duct Boots
2″ Drain and P-traps on tubs & showers
2″x4″ Sub Fascia
Separate Whole House Water Shutoff valve box
FHA Grade Carpet Smoke / Carbon Monoxide detectors inside each bedroom and outside each bedroom area and in living areas
Joists 16″ OC Spanning Foundation to Post & Beam or optional truss floor system 50% Stronger & 33% Stiffer